NEW Mobile Sanitisation Unit!

Let’s be part of the solution… Together! To wipe out COVID-19. Clean. Sanitise. Disinfect. The right way! For outdoor public & private areas.

Following the outbreak of COVID – 19 and the prospect of further pandemic, we here at Jetwave Group have developed a unique accessory driven by high pressure water to do our part and assist with a solution in primary response to providing public and private outdoor spaces a simple yet extremely through end to end solution and suggested workflow process to Clean, Sanitisation and Disinfect.

This process can harness both the effectiveness of new high pressure water foam & misting cleaning technology coupled with the efficiency of our Australian Made innovative High Pressure Water Cleaning systems available in Hot and/or Cold water output with a variety of compact mounting options and accessory to suit almost any cleaning task.

The Jetwave Dual Bio Air & Water Bypass Sanitiser/Disinfect attachment is an all-in-one plug and play smart solution to any high pressure water cleaning system. Utilising the power of venturi it allows safe hygienic consistent application of biodegradable smart chemicals to clean, sanitise & disinfect outdoor surfaces to fight the spread against virus, disease & pathogen infection.

Standout Features

• Stainless Steel construction.
• 3 way ergonomic selection handle.
  – HP Clean (Clean)
  – Foam (Sanitise)
  – Fog (Disinfect)
• Two colour coded chemical pick up hoses with filter.
• Adjustable dosage pick up at chemical inlet port.
• 5m Hose included
• Puncture proof foam filled wheels.
• Onboard accessory storage
• OPTIONAL: Cleaning chemical
• OPTIONAL: Stainless Steel Hose Reel

Fields of application

• Public spaces/areas
• High volume public areas
• Parks, Outdoor & Stadium seating
• Playgrounds
• Bus Stops
• Tram/Train Shelters
• Entrance & exterior wash-down

World Health Organization (WHO) and the Centre for Disease Control (CDC) recommended that surfaces be first cleaned and then disinfected as regularly as possible to assist in the continued fight against the spread of a virus (e.g. COVID-19)

6 Step Suggested Work Flow Framework:

Important definition(s). Sanitising is to reduce, not kill, the occurrence and growth of bacteria, viruses and fungi. Disinfecting is a process to a surface that is intended to “kill” the micro organisms, viruses and pathogens.

1. Prepare equipment, site and front line operator(s) with appropriate pre-start checks and operator Personnel Protective Equipment (PPE) as to not come in contact with.
2. Clean / wash all the targeted surfaces / underlying substrate to clear and break down all organic matter systems, mould, bird excrement, dirt & debris, etc.
   This can be done with a High Pressure Clean (Hot or Cold Water).
   NOTE: Hot water at a temperature of 60 degree Celsius will provide both a deep clean and sanitisation process. Hot water will also assist to lift grease and grime.
   NOTE: if only a cold water high pressure wash is being used the third (3rd) step becomes even more important to utilise the Chemical to assist in the sanitisation of the targeted surface.
3. Sanitisation (foam head or low pressure wash function) the targeted surface / substrate with a mixture of appropriate chemical solution e.g. a mixture of surfactant multipurpose soap (alkaline degreasing based) and sodium hypochlorite (bleach) and allowable to sit for 10min (this can be done with either a hot or cold water high pressure clean / wash). In reality this step is only required if hot water at 70 degrees or more is not being utilised in clean/wash function.
   NOTE: the chemical dosage rate / intake flow volume mixture can be adjusted via the dosage nozzle set that sits behind the injector barb depending on flow rate of high pressure pump.
4. Repeat step 2 for removal of foam
5. Disinfection (fogging head rinse function) the targeted surface / substrate with a mixture of appropriate chemical solution and high pressure water. Chemical used: Benzalkonium Chloride as a Quaternary Ammonia Compound solution at a ratio of 50:1. This Disinfecting stage is where a mist of solution is applied to all surfaces and allow to settle for approx. 10 minutes. Proceeding this, surfaces can be wiped down (where required) or allowed to air dry; leaving surfaces now clean, sanitised and disinfected.
   NOTE: the chemical dosage rate / intake flow volume mixture can be adjusted via the dosage nozzle set that sits behind the injector barb depending on flow rate of high pressure pump.
6. Recovery Drainage and runoff; be fully aware of protecting our environment, waterways and storm water drains. Closely manage on site water mixture runoff and ensure utilisation of waste water catchment barriers.

*This system does not guarantee complete sterilisation or a 100% germ kill without approved laboratory swab testing and stringent on-site control procedures.